Версия для печати

Опубликованные стандарты ИСО/ТК96

ISO 2374:1983
Lifting appliances -- Range of maximum capacities for basic models

ISO 4301-1:1986
Cranes and lifting appliances -- Classification -- Part 1: General

ISO 4301-2:1985
Lifting appliances -- Classification -- Part 2: Mobile cranes

ISO 4301-3:1993
Cranes -- Classification -- Part 3: Tower cranes

ISO 4301-4:1989
Cranes and related equipment -- Classification -- Part 4: Jib cranes

ISO 4301-5:1991
Cranes -- Classification -- Part 5: Overhead travelling and portal bridge cranes

ISO 4302:1981
Cranes -- Wind load assessment

ISO 4304:1987
Cranes other than mobile and floating cranes -- General requirements for stability

ISO 4305:1991
Mobile cranes -- Determination of stability

ISO 4306-1:2007
Cranes -- Vocabulary -- Part 1: General

ISO 4306-2:1994
Cranes -- Vocabulary -- Part 2: Mobile cranes

ISO 4306-3:2003
Cranes -- Vocabulary -- Part 3: Tower cranes

ISO 4306-5:2005
Cranes -- Vocabulary -- Part 5: Bridge and gantry cranes

ISO 4308-1:2003
Cranes and lifting appliances -- Selection of wire ropes -- Part 1: General

ISO 4308-2:1988
Cranes and lifting appliances -- Selection of wire ropes -- Part 2: Mobile cranes -- Coefficient of utilization

ISO 4309:2004
Cranes -- Wire ropes -- Care, maintenance, installation, examination and discard

ISO 4309:2004/Amd 1:2008

ISO 4310:1981
Cranes -- Test code and procedures

ISO 7296-1:1991
Cranes -- Graphic symbols -- Part 1: General

ISO 7296-1:1991/Amd 1:1996

ISO 7296-2:1996
Cranes -- Graphical symbols -- Part 2: Mobile cranes

ISO 7296-3:2006
Cranes -- Graphical symbols -- Part 3: Tower cranes

ISO 7363:1986
Cranes and lifting appliances -- Technical characteristics and acceptance documents

ISO 7752-1:1983
Lifting appliances -- Controls -- Layout and characteristics -- Part 1: General principles

ISO 7752-2:1985
Lifting appliances -- Controls -- Layout and characteristics -- Part 2: Basic arrangement and requirements for mobile cranes

ISO 7752-2:1985/Add 1:1986

ISO 7752-3:1993
Cranes -- Controls -- Layout and characteristics -- Part 3: Tower cranes

ISO 7752-4:1989
Cranes -- Controls -- Layout and characteristics -- Part 4: Jib cranes

ISO 7752-5:1985
Lifting appliances -- Controls -- Layout and characteristics -- Part 5: Overhead travelling cranes and portal bridge cranes

ISO 8087:1985
Mobile cranes -- Drum and sheave sizes

ISO 8566-1:1992
Cranes -- Cabins -- Part 1: General

ISO 8566-2:1995
Cranes -- Cabins -- Part 2: Mobile cranes

ISO 8566-3:1992
Cranes -- Cabins -- Part 3: Tower cranes

ISO 8566-4:1998
Cranes -- Cabins -- Part 4: Jib cranes

ISO 8566-5:1992
Cranes -- Cabins -- Part 5: Overhead travelling and portal bridge cranes

ISO 8686-1:1989
Cranes -- Design principles for loads and load combinations -- Part 1: General

ISO 8686-2:2004
Cranes -- Design principles for loads and load combinations -- Part 2: Mobile cranes

ISO 8686-3:1998
Cranes -- Design principles for loads and load combinations -- Part 3: Tower cranes

ISO 8686-4:2005
Cranes -- Design principles for loads and load combinations -- Part 4: Jib cranes

ISO 8686-5:1992
Cranes -- Design principles for loads and load combinations -- Part 5: Overhead travelling and portal bridge cranes

ISO 9373:1989
Cranes and related equipment -- Accuracy requirements for measuring parameters during testing

ISO 9374-1:1989
Cranes -- Information to be provided -- Part 1: General

ISO 9374-3:2002
Cranes -- Information to be provided for enquiries, orders, offers and supply -- Part 3: Tower cranes

ISO 9374-4:1989
Cranes -- Information to be provided -- Part 4: Jib cranes

ISO 9374-5:1991
Cranes -- Information to be provided -- Part 5: Overhead travelling cranes and portal bridge cranes

ISO 9926-1:1990
Cranes -- Training of drivers -- Part 1: General

ISO 9926-3:2005
Cranes -- Training of drivers -- Part 3: Tower cranes

ISO 9927-1:1994
Cranes -- Inspections -- Part 1: General

ISO 9927-3:2005
Cranes -- Inspections -- Part 3: Tower cranes

ISO 9928-1:1990
Cranes -- Crane driving manual -- Part 1: General

ISO 9928-2:2007
Cranes -- Crane driving manual -- Part 2: Mobile crane operators

ISO 9942-1:1994
Cranes -- Information labels -- Part 1: General

ISO 9942-3:1999
Cranes -- Information labels -- Part 3: Tower cranes

ISO 10245-1:2008
Cranes -- Limiting and indicating devices -- Part 1: General

ISO 10245-2:1994
Cranes -- Limiting and indicating devices -- Part 2: Mobile cranes

ISO 10245-3:2008
Cranes -- Limiting and indicating devices -- Part 3: Tower cranes

ISO 10245-4:2004
Cranes -- Limiting and indicating devices -- Part 4: Jib cranes

ISO 10245-4:2004/Cor 1:2006

ISO 10245-5:1995
Cranes -- Limiting and indicating devices -- Part 5: Overhead travelling and portal bridge cranes

ISO 10972-1:1998
Cranes -- Requirements for mechanisms -- Part 1: General

ISO 10972-3:2003
Cranes -- Requirements for mechanisms -- Part 3: Tower cranes

ISO 10972-4:2007
Cranes -- Requirements for mechanisms -- Part 4: Jib cranes

ISO 10972-5:2006
Cranes -- Requirements for mechanisms -- Part 5: Bridge and gantry cranes

ISO 10973:1995
Cranes -- Spare parts manual

ISO 11629:2004
Cranes -- Measurement of the mass of a crane and its components

ISO 11630:1997
Cranes -- Measurement of wheel alignment

ISO 11660-1:2008
Cranes -- Access, guards and restraints -- Part 1: General

ISO 11660-2:1994
Cranes -- Access, guards and restraints -- Part 2: Mobile cranes

ISO 11660-3:2008
Cranes -- Access, guards and restraints -- Part 3: Tower cranes

ISO 11660-5:2001
Cranes -- Access, guards and restraints -- Part 5: Bridge and gantry cranes

ISO 11661:1998
Mobile cranes -- Presentation of rated capacity charts

ISO 11662-1:1995
Mobile cranes -- Experimental determination of crane performance -- Part 1: Tipping loads and radii

ISO 11994:1997
Cranes -- Availability -- Vocabulary

ISO 12210-1:1998
Cranes -- Anchoring devices for in-service and out-of-service conditions -- Part 1: General

ISO 12210-4:1998
Cranes -- Anchoring devices for in-service and out-of-service conditions -- Part 4: Jib cranes

ISO 12210-4:1998/Cor 1:2000

ISO 12478-1:1997
Cranes -- Maintenance manual -- Part 1: General

ISO 12480-1:1997
Cranes -- Safe use -- Part 1: General

ISO 12480-3:2005
Cranes -- Safe use -- Part 3: Tower cranes

ISO 12480-4:2007
Cranes -- Safe use -- Part 4: Jib cranes

ISO 12482-1:1995
Cranes -- Condition monitoring -- Part 1: General

ISO 12485:1998
Tower cranes -- Stability requirements

ISO 12488-1:2005
Cranes -- Tolerances for wheels and travel and traversing tracks -- Part 1: General

ISO 12488-1:2005/Cor 1:2008

ISO 12488-4:2004
Cranes -- Tolerances for wheels and travel and traversing tracks -- Part 4: Jib cranes

ISO 13200:1995
Cranes -- Safety signs and hazard pictorials -- General principles

ISO 13202:2003
Cranes -- Measurement of velocity and time parameters

ISO 14518:2005
Cranes -- Requirements for test loads

ISO 15442:2005
Cranes -- Safety requirements for loader cranes

ISO 15513:2000
Cranes -- Competency requirements for crane drivers (operators), slingers, signallers and assessors

ISO/TS 15696:2000
Cranes -- List of equivalent terms

ISO/TR 16880:2004
Cranes -- Bridge and gantry cranes -- International Standards for design and manufacturing requirements and recommendations

ISO 16881-1:2005
Cranes -- Design calculation for rail wheels and associated trolley track supporting structure -- Part 1: General

ISO/TR 19961:2005
Cranes -- Safety code on mobile cranes

ISO 22986:2007
Cranes -- Stiffness -- Bridge and gantry cranes

ISO 23813:2007
Cranes -- Training of appointed persons

ISO 23815-1:2007
Cranes -- Maintenance -- Part 1: General

ISO 23853:2004
Cranes -- Training of slingers and signallers

ISO/TR 25599:2005
Cranes -- Jib cranes -- International Standards for design, manufacturing, use and maintenance requirements and recommendations

ISO/TR 27245:2007
Cranes -- Tower cranes -- International Standards for design, manufacture, use and maintenance requirements and recommendations